ECHO EZ1 Zone 1 Digital Intercom Stations
- Weather and corrosion resistant design
- Private full duplex handset communication
- Headset, gooseneck microphone and handset options
- Single touch speed dialing
- Group call, all-call, priority call, auto conference
- Simple one pair wiring
- Output to powered loudspeaker
- IP66
- CE and ATEX certified
Description
ECHO EZ1 Series Intercom Stations provide safe and efficient two-way voice communications in ECHO Digital Intercom Systems. The EZ1 Series ECHO Station is designed and approved for use in Zone 1 Hazardous Areas, Ex II 2 G EEx meib IIC T6.
The EZ1 Series ECHO ATEX station provides instantaneous high-speed connections and clear, crisp digital voice quality. Each station offers single-button all call, priority emergency paging, group paging, speed dial, conference call, and relay output.
Any station can call any other station(s) in an ECHO Digital Intercom System. With the headset or gooseneck microphone options, each is capable of hands-free voice communication. Because the ECHO Digital Central Exchange provides 30 channels of simultaneous communication, calls are processed and connected immediately without dial tone or delay.
The Station keypad is designed to provide tactile and audible feedback (via external powered loudspeaker) for a positive activation. Each station may be programmed for four levels of privacy for receiving calls; non-private, semi-private, full privacy and do-not-disturb. Volume for voice and signal levels are easily adjusted on the keypad.
Each Station is constructed of heavy duty glass reinforced polyester (GRP), equipped with a weatherproof keypad, and are rated for use in IP66 dust- and water-tight applications. EZ1 Series Stations can be ordered with curly cord, stainless steel handset cord, stubby/gooseneck microphone or headset.
Specifications
Voltage | 24VDC nominal (line driven from ECHO control) |
Cable | 25mA |
Current Connected | 100mA |
Microphone Type | Handset and Stubby Microphone – Dynamic |
Housing Material | Handset – Moulded polyurethane |
Stubby Mic Enclosure – Stainless steel | |
Microphone Sensitivity | -54dB (Stubby Microphone) |
Audio Output | 2.7 Vrms / 1.0k Ohm load |
Volume Control | Via Keypad – 30dB in ten steps |
Line Attenuation | 24dB at 160kb/s maximum |
Loop Resistance | 170 Ohm maximum |
Distance | 2 km (1.2 miles) maximum |
Cable | 3 x M20 |
Operating Current | -31 °F |
Operating Temperature Maximum | 122 °F |
Cable | EEx e screw terminal block |
Relay Switching Capacity | 3A at 240VAC |
General Weight | 9.50 lb |
Shipping Weight | 11.10 lb |
Height | 16.250 in |
Width | 9.500 in |
Depth | 9.250 in |
Ingress Protection (IP) | IP66 (IP65 on handset) |
Shipping Dimensions | 16.25″ x 9.5″ x 9.25″ |
Resources
Product Data Sheet:
Product Manuals:
PRODUCT MANUAL_ECHO EZ1_Rev1013
Certifications:
CERTIFICATES_ECHO EZ1_Brexit ATEX Cert Transfer_2020_12-17-20
Declaration of Conformity:
EU+UKCA Declaration of Conformity_ECHO EZ1_2023-01-01
For more details, please visit Federal Signal Website.