ECHO E1 Explosion Proof Digital Intercom Stations for North American Applications
- Stainless steel hardware
- Super-bright LED indicator
- Tactile keypad
- Headset, gooseneck microphone and handset interface options
- Hinged front cover
- Output to powered loudspeaker
- Rated Type 4X and IP66
- CE certified
- UL and cUL Listed
Description
ECHO E1 Explosion Proof Digital Intercom Stations, UL, cUL and CE listed, provide safe and efficient two-way voice communications in ECHO Digital Intercom Systems. The E1 Series ECHO Station is designed and approved for use in Hazardous Areas including Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F and G; and Class III.
E1 Series ECHO stations provide instantaneous high-speed connections and clear, crisp digital voice quality. Each station offers single-button all call, priority emergency paging, group paging, speed dial, conference call, and relay output.
Any station can call any other station(s) in an ECHO Digital Intercom System. With the headset or gooseneck microphone options, each is capable of hands-free voice communication. Because the ECHO Digital Central Exchange provides 30 channels of simultaneous communication, calls are processed and connected immediately without dial tone or delay.
The station keypad is designed to provide tactile and audible feedback (via external powered speaker) for positive activation. Each station may be programmed for four levels of privacy for receiving calls; non-private, semi-private, full privacy and do-not-disturb. Volume for voice and signal levels are easily adjusted on the keypad.
Each station is constructed with a heavy duty, corrosion-resistant cast aluminum and a powder coated aluminum faceplate, equipped with weatherproof keypads, and is rated for use in Type 4X dust-and water-tight applications.
Specifications
Voltage | 24VDC nominal (line driven from ECHO control) |
Enclosure Rating | Type 4X and IP66 |
Operating Temperature Minimum | -40 °F |
Operating Temperature Maximum | 149 °F |
Current Idle | 25mA |
Current Connected | 100mA Maximum |
Microphone Type | Handset and Stubby Microphone – Dynamic |
Housing Material | Handset – Moulded polycarbonate/ABS blend |
Stubby Mic Enclosure – Stainless steel | |
Handset Cord | Handset Cord: Polyeurethane |
Microphone Sensitivity | -54dB (Stubby Microphone) |
Audio Output | 2.7 Vrms / 1k Ohm load |
Volume Control | Via Keypad – 30dB in ten steps |
Ingress Protection (IP) | IP66 (IP65 on handset) |
Line Attenuation | 24dB at 160kb/s maximum |
Loop Resistance | 170 Ohm maximum |
Distance | 2 km (1.2 miles) maximum |
Cable | One twisted pair, non-shielded |
Cable Entries | 3 x 3/4″ NPT |
Cable Termination | Din rail mount tensioned clamp terminals |
Relay Switching Capacity | 3A at 240VAC |
Height | 20.630 in |
Width | 14.130 in |
Depth | 13.630 in |
Net Weight | 25 lb |
Shipping Weight | 30 lb |
Resources
Product Data Sheet:
Data Sheet_ECHO E1 Series_SYS7030
Product Manuals:
Ingress Protection Report_Echo E1
Certifications:
CERTIFICATES_Echo E1_UL and cUL Certificate of Compliance
CERTIFICATES_ECHO E1_UL I.S Headset Control Drawing #850000293
Declaration of Conformity:
EU+UKCA Declaration of Conformity_Echo E1_2023-01-01
For more details, please visit Federal Signal Website.